2Gig DW10-345

Thin Door/Window Contact

Product Features:

  • Magnet Dimensions: 1.3 x 0.435 x 0.312 in.
  • Sensor Dimensions: 2.59 x 1.03 x 0.49 in.
  • Fully supervised
  • Lithium batteries
List : $58.47  
Price : $29.24
Save :  $29.23
Qty :
Napco Security Technologies GEM-RTRANS  
ION Security MICRA  
ION Security PLUNGER  
Napco Security Technologies GEM-TRANSLP  
Napco Security Technologies GEM-TRANS2  
DSC EV-DW4975  
DSC WS4945  
Honeywell 5816  
DSC WS4965  
Honeywell 5811  
DSC EV-DW4917  
DSC EV-DW4955  
Honeywell 5815  
Honeywell 5816BR  
Contact our Experts!
Ask a Question  about the 2Gig DW10-345 Thin Door/Window Contact

Thin Door/Window Contact

The 2Gig DW10-345 Thin Door/Window Contact is a Thin Door/Window Contact that can be installed on doors, windows, and many other objects that open and close. The Door/Window Contact sensor transmits signals to the 2GIG Go!Control Panel (service plan available for remote monitoring) when the magnet is separated from the sensor.

Features and Function

The sensor has an external input that accepts Normally Closed dry contact devices. The sensor is equipped with a tamper-resistant cover for additional security. The sensor and magnet should be mounted at least 4.7" above the floor to avoid damage and they should not be mounted in an area where they will be exposed to moisture. Two included CR2032 batteries (included) power the Thin Door/Window Contact.


The 2Gig DW10-345 Thin Door/Window Contact Sensor Dimensions L 2.59 inches x W 1.03 inches x H 0.49 inches, Magnet Dimensions L 1.3 inches x W 0.435 inches x H 0.312 inches, Weight (including battery & magnet) 1.1oz, Wireless RF Signal Range 350 feet, open air, with 2GIG Go!Control Panel, Code Outputs, Alarm, alarm restore, external alarm, external restore, tamper, tamper restore, supervisory, low battery, Transmitter Frequency 345 MHz (crystal controlled), Transmitter Frequency Tolerance +/- 15 KHz, Transmitter Bandwidth 24 KHz, Modulation Type Amplitude shift keying-On/Off keying (ASK-OOK), Unique ID Codes Over 1 million different code combinations, Supervisory Interval 70 minutes, Peak Field Strength Typical 36,000 uV/m at 3m, External Input Sampling Current 20 uA, External Input Accepts N/C dry contact devices, Reed Switch Magnetic Sensitivity 10 to 20 amp turns, Reed Sensitivity 0.625 inches minimum gap, 0.85 inches typical, Magnet Type Rare earth, Housing Material ABS plastic, Operating Temperature 32°F to 120°F/0°C to 49°C, Relative Humidity 5%-95% non-condensing, Battery (included) 2 Panasonic CR2032 or equivalent lithium batteries, Regulatory Listings ETL, FCC part 15, Industry Canada, and Manufacturer Warranty 2 years.



2GIG-DW10-345 Thin Door/Window Contact Features:


  • Magnet Dimensions: 1.3 x 0.435 x 0.312 in.
  • Sensor Dimensions: 2.59 x 1.03 x 0.49 in.
  • Fully supervised
  • Lithium batteries
  • Reed sensitivity: 0.625 in. minimum gap, 0.85 in. typical
  • Tamper protected