Altronix AL600ULACMCB

Altronix AL600ULACMCB Power Supply/Charger with Multi-Output Access Power Controllers

Model AL600ULACMCB converts an 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Class 2 Rated power limited PTC protected Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. These units will route power to a variety of access control hardware devices including MagLocks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes.

The units are designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Features:

• 12VDC or 24VDC selectable output
• 6 Amp of continuous supply current
• Class 2 Rated power limited output
• 115VAC 60Hz, 1.9 Amp input
• Filtered and electronically regulated outputs
• Short circuit and thermal overload protection
• Built-in charger for sealed lead acid or gel type battery backup
• Maximum charge current 0.7 Amp
• Zero voltage drop upon transfer to battery backup
• AC input and DC output LED indicators
• AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
• Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC)
• Lifetime Warranty