Fire Lite Alarms FCPS-24FS6

Fire Lite Alarms FCPS-24FS6

Fire Lite Alarms FCPS-24FS6 Remote Power Supply, UL Listed NAC Synchronization, Fully supervised power supply, Self-contained in compact, Optional mounting kit.
List : $606.38  
Price : $432.34
Save :  $174.04
Qty :
Honeywell 5883  
Honeywell 5495  
Honeywell 5496  
GE Security EBPS6A  
Honeywell 5499  
Honeywell 5895XL  
Contact our Experts!
Ask a Question  about the Fire Lite Alarms FCPS-24FS6 Fire Lite Alarms FCPS-24FS6

Fire Lite Alarms FCPS-24FS6 Remote Power Supply



The FCPS-24FS6 is a compact, cost-effective, 6-amp remote power supply with battery charger. The FCPS-24FS6 may be connected to any 12- or 24-volt Fire Alarm Control Panel (FACP) or may stand alone. Primary applications include Notification Appliance (bell) Circuit (NAC) expansion (to support ADA requirements and NAC synchronization) or auxiliary power to support 24-volt system accessories. The FCPS-24FS6 provides regulated and filtered 24 VDC power to four Notification Appliance Circuits configured as either four Class B (Style Y) or Class A (Style A, with ZNAC-4 option module). Alternately, the four outputs may be configured as all non-resettable or all resettable or two non-resettable and two resettable. The FCPS- 24FS6 also contains a battery charger capable of charging up to 18 Amp Hour batteries.



  • UL Listed NAC Synchronization using System Sensor, Wheelock or Gentex (Commander Series) appliances.
  • Cascadable up to 10 power supplies (four with Gentex) with strobe timing maintained.
  • Operates as a sync follower or a sync generator (default). * See note on reverse side.
  • Contains two, fully-isolated input/control circuits (triggered from FACP Notification Appliance Circuit [NAC expander mode] or jumpered permanently on [standalone mode]).
  • Optional mounting kit, P/N 90286, to internally house addressable SLC control module (CRF-300 or CMF- 300) for alarm activation.
  • Four Class B (Style Y) or four Class A (Style Z) (with ZNAC- 4 Module) Notification Appliance Circuits.
  • 6.0 A full load output (3.0 A maximum per circuit) in NAC expander mode (UL 864).
  • 4.0 A continuous output in stand-alone mode (UL 1481).
  • In stand-alone mode, output power circuits may be configured as resettable (reset line from FACP required) or non-resettable or a mix of two and two.
  • Fully regulated and filtered power output (optimal for powering four-wire smoke detectors, annunciators and other system peripherals requiring regulated/filtered power).
  • Power-limiting technology meets UL power-limiting requirements.
  • Form-C normally-closed trouble relay.
  • Fully supervised power supply, battery and Notification
  • Appliance Circuits.
  • Selectable earth fault detection. AC trouble report selectable for immediate or 8 hour delay.
  • Works with virtually any UL 864 fire alarm control which utilizes an industry-standard reverse-polarity notification circuit (including unfiltered and unregulated bell power).
  • Requires input trigger voltage of 9.0 - 32 VDC.
  • Self-contained in compact, lockable cabinet (15" [38.1 cm] H x 14.5" [36.8 cm] W x 2.75" [7.0 cm] D).
  • Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batteries.
  • Battery charger may be disabled via dip switch for applications requiring larger batteries.
  • Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1 mm ) wire.
1 Year Extended Warranty
$64.85  | Add to Cart

2 Year Extended Warranty
$108.09  | Add to Cart

3 Year Extended Warranty
$151.32  | Add to Cart