Pelco MCS16-10

Pelco MCS16-10 Indoor 16 Output 24 VAC Central Power Supply

Power supplies in the MCS Series offer a variety of configurations for powering up to 16 units from a single power source. The power supplies provide 24 VAC output for 4, 8, or 16 units. To compensate for voltage losses over long wire runs, 28 VAC outputs also are available on most models. The power supplies have a selectable input of 120 or 240 VAC and are packaged in an easy-to install metal enclosure that has ample room for wiring connections

and conduit entries.

Models are available with either fuses or self-resetting circuit breakers on each output. Fused models provide a greater degree of protection for the camera because they are faster acting and more precise. Circuit breakers will self-reset when the fault is corrected, eliminating the need for replacing fuses. However, the amount of current required to trip a circuit breaker can vary as much as 100 percent depending on temperature. In the fused models, the values of fuses can be changed depending upon the specific current requirements of the equipment connected.

Features:

• 10 Amp Capacities
• Outputs for 16 Cameras
• Fuse or Circuit Breaker Protection; Spare Fuses Included with Fused Models Only
• 120 VAC or 230 VAC Selectable Input
• 24 VAC Output or 28 VAC Output for Longer Wire Runs
• AC Power Indicator with Power On/Off Switch
• Compatible with Cameras, Domes, and Pan/Tilts