West Penn LS1822-1000

West Penn LS1822-1000 1000 Feet Access Control Cable

Lickity Split Bondled Cables, a new concept for quick, easy, and efficient installation of composite cables. The patent pending construction offers an intermittently internal bonded and bundled design that we like to call Bondled. The bondling is done internally every 4 to 7 inches, depending on the cable grouping.

Jacketed composite cables are larger and more difficult to terminate. The Lickity Split Bondled Cables offer the advantage of easier, faster termination time, as well as a smaller cable profile.

Bound Cables are composite cables combined within a helical wrap that offer the advantage of a small profile, and a lower cost, but with the wrap the cable may get snagged or caught by burrs during installation. The Lickity Split Bondled Cables offer the same advantages as the bound cables, but because of its cabled construction and Bondled design, the cable can be installed and terminated in a lickity split.

Feature:

• Lickity Split Design: Cables bonded together in interval length. Approx. 4-6 inches
• Composite Cable Consisting of:
  • Cable 1 Door Contact Cable
    • 2 Conductor 22 AWG (7x30) Bare Copper
    • Unshielded Construction
    • PVC Jacket Nom. O.D. (.127) 3.23mm
  • Cable 2 Request to Exit Cable
    • 4 Conductor 22 AWG (7x30) Bare Copper
    • Unshielded Construction
    • PVC Jacket Nom. O.D. (.153) 3.89mm
  • Cable 3 Access Control Card Reader Cable
    • 6 Conductor 22 AWG (7x30) Bare Copper
    • Overall Shield 100% Coverage
    • PVC Jacket Nom. O.D. (.187) 4.75mm
  • Cable 4 Lock Power Cable                 
    • 4 Conductor 18 AWG (7x26) Bare Copper
    • Unshielded Construction
    • PVC Jacket Nom. O.D. (.191) 4.85mm
• UL listed NEC type CMR as defined in Article 800
• C (UL) listed type CMH
• Constructed in accordance with UL Standard 444
• Complies with UL 1666 Vertical Tray (Riser) Flame Test
• Meets 300 volt requirement as specified in Article 800 of the NEC