No products in the cart.
PoE Switch
AW-FET-060C-065 Unmanaged 4xFE PoE + 2xFE UTP Switch
Key Features
- 15.4/30W 802.3af/802.3 at complaint
- 4KV PoE surge protection each port(AW-FET-060C-065/AW-FET-100C-120/AW-FGT-100C-120
- 12KV PoE surge protection each port(AW-FGT-180c-250/AW-FGT-260C-380
- 4KV AC Surge protection
- 20% range of input voltage tolerance(280AC, 4Hr,300VAC, 1min)
- Circuit protection prevents power interface between ports
- Detects PoE PD(power device) automatically
- ST mode reaches PoE camera up to 100M @100Mbps via any PoE port
- EX mode reaches 802.3 at camera up to 200M @10Mbps via any EX PoE ports
- DIP switch provides ST Standard & EX Extend operational modes
- Designed for IP surveillance
- EX mode: transmits data & power up to 200 meters at 10mbs on a single cable
- Increases input voltage tolerance by 10%
- Surge protection blocks damage from lightning and power spikes
| Technical Specifications | |
| Model | AW-FET-060C-065 |
| Short Highlight | 4xFE PoE + 2xFE UTP |
| Networking Specifications | |
| 10/100Mbps RJ45 PoE Port | 4 |
| 10/100Mbps RJ45 Port | 2 |
| 10/100/1000Mbps RJ45 Port | |
| Gigabit SFP Slot | |
| Gigabit RJ45/SFP Combo Ports | |
| EX Mode PoE([email protected]) | 2 * EX Mode: 1. CAT.6 or better UTP/STP cable is highly recommended., 2. Low quality cables will seriously limit the cabling distance., 3. Exmode doesn't support with the FE8391-V model. |
| VLAN Mode | |
| Ethernet Performance | |
| Switching Capacity | 1.2Gbps |
| Mac Table | 2K |
| Jumbo Frame | 1536 Bytes |
| Auto-MDI/MDI-X, Auto-Negotiation | Supported |
| Power Specifications | |
| Power Input Voltage | 100VAC~240AC |
| Max. PoE Ouput Power | Per Port 54VDC, Max.30W |
| Total PoE Power Budget | 60W |
| IEEE 802.3af/at | Supported |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE PD Auto Detection | Supported |
| Surge Protection/Each PoE Port | 4KV |
| General | |
| Operating Temperature | 0°C ~ 50°C (32°F ~ 122°F) |
| storage Temperature | -20°C ~ 70°C (-4°F ~ 158°F) |
| Operating Humidity | 10%~90% non-condensing |
| Dimensions | 168(L)x94.1(W)x32(H)mm |
| Weight | 0.5kg |
| Certifications | |
| EMC | CE, FCC, VCCI, C-Tick Class A |
| Safety | ENS60950-1, IEC60950-1 |
Based on 0 reviews
Be the first to review “AW-FET-060C-065 Unmanaged 4xFE PoE + 2xFE UTP Switch”
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Related products
-
PoE Switch
Uniview NSW2010-16T2GC-POE-IN 16PoE+2GC Switch
Login/Register for Dealer Price- Multiple working modes to address your business needs:Normal, Secure and Surveillance
- Support port traffic control
- Support for secure mode, all downlink ports can communicate only with uplink ports
- Up to 250m transmission distance on surveillance mode
- Support buffer optimization
- All metal housing, safe and reliable
SKU: NSW2010-16T2GC-POE-IN -
PoE Switch
Uniview NSW2010-10T-PoE-IN 8PoE+2Port Switch
Login/Register for Dealer Price- Multiple working modes to address your business needs:Normal, Secure and Surveillance
- Support port traffic control
- Support for secure mode, all downlink ports can communicate only with uplink ports
- Up to 250m transmission distance on surveillance mode
- Support buffer optimization
- All metal housing, safe and reliable
SKU: NSW2010-10T-PoE-IN
There are no reviews yet.