The ACTi E219 Network Box Camera features a progressive scan CMOS image sensor with a 10x optical zoom 2MP lens capable of recording footage in 1080p resolution at 60 frames per second. Additionally, the surveillance camera utilizes H.264 compression to efficiently transmit and store data by reducing bandwidth. 145dB wide dynamic range works to automatically adjust brightness and contrast to deliver high-quality, clear footage. Further, the security camera incorporates a SD memory card slot for alternative, on-board storage.
Color: 0.1 lux at F2.8 (30 IRE , 2400 K); B/W: 0.05 lux at F2.8 (30 IRE, 2400 K)
Color to B/W Switch
ISP based switch, configurable
Mechanical IR Cut Filter
Yes
IR Sensitivity Range
700-1100nm
IR LED
No
Electronic Shutter
1/5-1/2000 second (manual mode); 1-1/10000 second (auto mode)
Horizontal Resolution (TV Lines)
1100 TVL
S/N Ratio
56 dB
Lens
Focal Length
Zoom, f4.9-49mm
Aperture
F2.8-F3.5
Zoom Ratio
10x optical zoom
Zoom Speed
3.3 second (wide to tele)
Zoom Application
Camera Installation
Iris
Adaptive iris
Focus
Auto focus
Lens Mount
Board mount
Horizontal Viewing Angle
60° – 7.3°
Vertical Viewing Angle
35.5° – 4.2°
PTZ
Absolute Position
Yes
Pan, Tilt or Zoom protocol
Visca, Pelco-D, Pelco-P, ACTi URL command
Video
Compression
H.264 (Baseline/ Main/ High profile), MJPEG
Maximum Frame Rate vs. Resolution
60 fps at 1920 x 1080
60 fps at 1280 x 720
30 fps at 640 x 480
30 fps at 320 x 240
High Frame Mode
Support
Multi-Streaming
Simultaneous triple streams based on three configurations
Bit Rate
128Kbps – 12Mbps (per stream)
Bit Rate Mode
Constant, Variable
Wide Dynamic Range
Extreme WDR (145 dB)
Image Enhancement
White Balance, Brightness, Contrast, Sharpness, Automatic gain control, Flickerless, Digital Image Stabilizer (DIS, EIS), Defogging
Digital Noise Reduction
2D + 3D DNR
Privacy Mask
20 configurable regions
Text Overlay
Yes
On-Screen Graphics
Yes
Built-in Analytics
Basic Face Detection, Object Based Motion Detection, Tampering Detection, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Object Loitering Detection
Server-based Analytics
Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy)
Image Orientation
Rotation (Corridor mode)
IVS performance
Certain algorithms may require more computing power, which may limit the number of algorithms that can be concurrently used in the camera. Please test the actual performance before using in a project.
IP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control
Video Analytics
Analysis Source Type
Video
Metadata Accuracy
Standard
Event
Event Trigger
Video motion detection (10 included and excluded polygons regions), External device through digital input, Sound detection, Intelligent event detection,
Event Response
Notify control center, Change camera settings, Command other devices, E-mail notification with snapshots, Play the audio file, Push notification to mobile device, Save video to local storage, Upload video to NVR server, Upload video or snapshot to FTP server, Activate external device through digital output
Integration
Unified Solution
Fully compatible with ACTi software
Software Development Kit
Yes
GPS Position
Manual setting
ONVIF Compliant
Yes, Profile S, Profile G, Profile T, Profile Q
GB28181 Compliant
Yes
Web Browser
IE 11
Auto Firmware Upgrade
Yes
SD Card Backup and Recovery
Automatically back up the video recordings from the memory card of camera to NVR 3 server with recovering lost videos after network connection recovery.
Interface
Serial Port
1 x RS-485/RS-422
Local Storage
MicroSDHC, MicroSDXC Memory Card Slot (card not included, up to 256GB)
Digital Input/Output
1/1
Operating Button
Reset Button
General
Power Source
DC 12V, PoE Class 3 (IEEE802.3af)
Power Consumption
7.4 W (PoE)
Weight
365g (0.805lb)
Dimensions
(W x H x D): 67mm x 65mm x 145mm (2.6″ x 2.5″ x 5.6″)
Environmental Casing
Optional housing (IP66)
Mount Type
Bracket, Pole Mount, Corner Mount
Heater
Yes
Starting Temperature
-10°C ~ 50°C (14°F ~ 122°F) within 30 minutes
Operating Temperature
-20°C ~ 50°C (-4°F ~ 122°F)
Operating Humidity
10% – 85% RH
Approvals
CE Class B, FCC Class B, EAC, UL (for optional PoE injector and power adapter)
Real-time Clock (RTC)
Yes
Warranty
3 Year(s). For extended warranty offering, see http://www.acti.com/support/warranty
PTZ Security Cameras, Security Cameras
There are no reviews yet.