Silent Knight SK-MON-10

Register to open a wholesale account and get special prices

Addressable Ten Input Monitor Module, Maximum IDC, Normal Operating Voltage, Alarm Current: 55 mA, Humidity: 10 to 93%


Honeywell SK-MON-10 Ten Input Monitor Module


The SK-Mon-10 Ten Input Monitor Module is intended for use in an intelligent alarm system. Each monitor module is intended to interface between a control panel and normally open contact devices, such as pull stations. A common SLC input is used for all modules, and the initiating device loops share a common supervisory supply and ground. Otherwise, each monitor operates independently from the others. Each module has its own unique address. A pair of rotary code switches is used to set the address of the first module from 01 to 150. The remaining modules are automatically assigned to the next nine higher addresses. Provisions are included for disabling a maximum of two unused modules to release the addresses to be used elsewhere. Each module also has panel controlled green LED indicators. The panel can cause the LEDs to blink, latch on, or latch off.



  • Normal Operating Voltage: 15-32 VDC
  • Stand-By Current: 3.5 mA
  • Alarm Current: 55 mA (assumes all ten LEDs solid on)
  • Temperature Range: 32�F to 120�F (0�C to 49�C)
  • Humidity: 10 to 93% Non-condensing
  • Dimensions: 6.8˝ H x 5.8˝ W x 1.25˝ D
  • Accessories: IDP-ACB Cabinet and Chassis
  • Wire Gauge: 12-18 AWG
  • Maximum IDC
  • Wiring Resistance: 1500 Ohms
  • Maximum IDC Voltage: 10.2 VDC
  • Maximum IDC Current: 240 μA (each circuit)

Based on 0 reviews

0.0 overall

Be the first to review “Silent Knight SK-MON-10”

Review now to get coupon!

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.
Call Now Button

Add address