Tripp Lite SmartOnline 120V 1kVA 800W Double-Conversion UPS, 2U Rack/Tower, Extended Run, Pre-Installed WEBCARDLX Network Interface, USB, DB9 Serial
? 1000VA / 1kVA / 800 watt on-line double-conversion 2U rack/tower UPS
? 100/110/120V +/-2% output at 50/60Hz, high efficiency economy mode option
? Expandable runtime, Hot-swap batteries; 13.5 in / 34.3cm installed depth
? USB, RS232 & EPO ports; pre-installed WEBCARDLX Network Interface
? Front panel status LEDs with detailed load and battery metering
? 2 independently switchable output load banks
? NEMA 5-15P input; 5-15R outlets
? To enable the Auto Probe feature, this product requires LX firmware update 15.5.2 or later to be installed
1000VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an installed depth of only 13.5 inches. Extended runtime available with optional BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U (multi-pack compatible) or BP24V36-2US (multi-pack compatible) external battery packs. Full-time sine wave 100, 110 or 120V output with +/-2% voltage regulation. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 150V. Highly efficient operation in optional economy mode saves BTU heat output and energy costs. NEMA 5-15P input plug; NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and pre-installed
WEBCARDLX network management interface card.
The Java-free HTML5-based WEBCARDLX interface enables full remote access for site
power and UPS status monitoring, configuration, control and email notifications
via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps
auto-sensing for optimum communication with an Ethernet network. Optional
EnviroSense2 modules (sold separately) provide a variety of environmental
monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1,
SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. PowerAlert UPS monitoring software is available via free download. Emergency Power Off (EPO) interface. Integrated two-bank PDU switching supports load shedding and remote reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. LED display panel easily rotates for viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs. $250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only).